Miele KF 2981 SF Operating and Installation instructions - Page 23
Building in the appliance, Before starting..., Tools required
![]() |
View all Miele KF 2981 SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Building in the appliance Before starting... It is essential to read these installation instructions carefully before starting to install the appliance. The appliance should be installed by a suitably qualified tradesman in accordance with these installation instructions. Safe operation of the appliance is only assured if it has been installed and connected in accordance with the installation instructions. Risk of damage and injury! This appliance is very heavy and can tip forwards when the door is open. Keep the appliance door shut until the appliance has been built in and secured in its housing in accordance with the operating and installation instructions. The appliance is both large and heavy. Installation must be carried out by two people. The appliance must be installed in accordance with local regulations. If local regulations are not available, the following regulations must be observed: - in the USA: the National Electric Code, ANSI/NFPA 70 - latest edition/ State and Municipal codes and/or local codes. - in Canada: the Canadian Electric code C22.1 - latest edition/Provincial and Municipal codes and/or local codes. Tools required - Cordless drill - TX 20 screwdriver - Hammer drill - Drill bits in various sizes, depending on materials - Hammer - Open-ended wrench - Ratchet wrench, attachment: socket, 5/16" (8 mm) - Adhesive tape - Utility knife - Pipe wrench - Level - Tape measure - Pencil Other - Step ladder - Hand truck 23
![](/manual_guide/products/miele-kf-2981-sf-operating-installation-instructions-526e4ce/23.png)