Maytag MFD2561HE Use and Care Guide - Page 16

Iceand - ice maker

Page 16 highlights

IceandWater Automatic Ice Maker Connect the ice maker to the water supply as instructed on pages 8-10. Proper water flow and a level refrigerator are essential for optimal ice maker performance, Operating Instructions • Confirm ice bin is in place and ice maker arm is down. • After freezer section reaches between 0° to 2° F C-18° to -17 ° C), ice maker fills with water and begins operating. You will have a complete harvest of ice approximately every three hours. • Allow approximately 24 hours after installation to receive first harvest of ice. • Discard ice created within first 12 hours of operation to assure system is flushed of impurities. • Stop ice production by raising ice maker arm until click is heard. • Ice maker will remain in the off position until arm is pushed down. • The first one or two batches will probably contain undersized and irregular cubes because of air in the supply line. • When the ice cubes are ejected it is normal for several cubes to be joined together at the ends. They can easily be broken apa_ The ice maker will continue to make ice until the supply of ice cubes raises the ice maker arm, shutting the ice maker off. • Certain sounds may accompany the various cycles of the ice maker. The motor may have a slight hum, the cubes will rattle as they fall into an empty storage pan and the water valve may click or "buzz" occasionally. • If the ice is not used frequently, the ice cubes will become cloudy, shrink, stick together and taste stale. Empty the ice storage bin periodically and wash it in lukewarm water. Be sure to dry the bin thoroughly before replacing it. • Beverages and foods should not be placed in the ice storage bin for quick chilling. These items can block the ice maker arm, causing the ice maker to malfunction. • Turn off Carm up_ the ice maker when the water supply is to be shut off for several hours. To Remove the Ice Bin: • Pull it forward, away from the ice maker. To avoid the ice maker dumping ice while the bin is removed, turn the ice maker off by raising the ice maker arm. To Install the Ice Bin: • Reverse the above procedure. Tum the ice maker on by lowering the ice maker arm. Water Dispenser (selectmodels) The Water Dispenser is located on the left side wall of the fresh food section. This design is for cold water dispensing only. To Dispense Water:. • Hold container under spout and press dispenser pad.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Iceand
Water
Automatic
Ice Maker
Connect
the
ice
maker to the water
supply
as
instructed
on
pages 8-10.
Proper
water
flow
and a
level
refrigerator
are essential
for
optimal
ice
maker
performance,
Operating
Instructions
Confirm ice bin is in place and ice maker arm is
down.
• After
freezer
section
reaches
between
0° to 2
°
F C-18
°
to
-17
° C), ice maker fills with water
and begins
operating.
You will have a complete
harvest
of ice approximately
every
three
hours.
Allow
approximately
24
hours
after
installation
to receive first
harvest of
ice.
Discard
ice created within
first
12 hours of operation
to assure
system
is flushed
of impurities.
• Stop
ice
production
by raising
ice maker arm until
click
is heard.
• Ice maker will
remain
in the off position
until
arm is
pushed
down.
The
first
one or two batches
will
probably
contain
undersized
and irregular
cubes
because
of air in the
supply
line.
• When the ice cubes
are ejected
it
is normal
for
several
cubes to be joined
together
at the ends. They
can easily be broken
apa_
The ice maker
will
continue
to make ice until the supply
of ice cubes
raises the ice maker arm, shutting
the ice maker
off.
• Certain
sounds
may accompany
the various
cycles
of
the ice maker. The motor
may have a slight
hum, the
cubes
will
rattle as they fall into an empty
storage
pan and the water valve may click
or "buzz"
occasionally.
If
the
ice is
not used
frequently,
the
ice
cubes will
become
cloudy, shrink,
stick together
and taste stale.
Empty
the ice storage
bin periodically
and wash it in
lukewarm
water.
Be sure to dry the bin thoroughly
before
replacing
it.
• Beverages
and foods should not be placed
in the ice
storage
bin for quick
chilling.
These items
can block
the ice maker arm, causing
the ice maker to
malfunction.
Turn off Carm up_ the ice maker
when the water
supply
is
to be shut
off for several
hours.
To Remove
the
Ice Bin:
Pull
it forward,
away
from the
ice
maker. To avoid the
ice
maker
dumping
ice while
the bin is removed,
turn
the ice maker
off
by raising
the ice maker
arm.
To Install
the
Ice
Bin:
• Reverse the above procedure. Tum the ice maker on
by lowering the ice maker arm.
Water Dispenser
(selectmodels)
The Water
Dispenser
is
located
on
the
left
side
wall
of the fresh
food
section.
This
design
is
for
cold
water
dispensing only.
To Dispense
Water:.
Hold container
under
spout
and
press
dispenser
pad.