Marantz SR6014 Owners Manual - Page 158
Connection 2: Connecting using a speaker, output terminal, Connection 3 : Connection using an
View all Marantz SR6014 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Contents Connections Playback o Connection 2: Connecting using a speaker output terminal When "Assign Mode" is set to "ZONE2" in the menu, ZONE2 audio is output from the HEIGHT2 speaker terminal. (v p. 209) MAIN ZONE This unit Settings Tips Appendix o Connection 3 : Connection using an external amplifier (ZONE2) The audio signals of this unit's ZONE2 audio output connectors are output to the ZONE2 amplifiers and played on these amplifiers. MAIN ZONE ZONE2 This unit Power amplifier L R AUX IN .. (R) (L) ZONE2 0 If the input for ZONE2 is set to "Source", all types of input signals can be listened to from ZONE2. 0 If the input for ZONE2 is set to a specific source (like CBL/SAT), only analog signal or 2-channel PCM signal input (from HDMI connectors or digital connectors (OPTICAL/ COAXIAL)) can be listened to from ZONE2. To playback HDMI signal other than 2-channel PCM in ZONE2, set "HDMI Audio" to "PCM". (v p. 238) 2-channel PCM signals are output from a device connected to the input source selected for ZONE2 and can be played back in ZONE2. In this case, the MAIN ZONE audio will also be converted to 2-channel PCM signals if the MAIN ZONE and ZONE2 are set to the same input source. However, depending on the playback device, the playback signal may not be converted to PCM even if this setting is configured. 0 The menu screen is not output in ZONE2. Front panel Display Rear panel 158 Remote Index