Marantz SR6013 Owners Manual English - Page 193

Contents Connections Playback Source Level This function corrects the playback level of the selected input source's audio input. Make this setting if there are differences in the input volume levels between the different sources. -12 dB - +12 dB (Default : 0 dB) 0 "Source Level" settings are stored for each input source. Settings Tips Appendix Input Select Set the audio input mode of each input source. The input modes available for selection may vary depending on the input source. 0 "Input Select" settings are stored for each input source. o Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to "Auto". Auto (Default): HDMI: Digital: Analog: 7.1CH IN: Automatically detect input signal and perform playback. Play only signals from HDMI input. Play only signals from digital audio input. Play only signals from analog audio input. Only signals input from the 7.1CH IN connector will be played back. 0 If "HDMI Control" is set to "On" and a TV compatible with the ARC is connected via the HDMI MONITOR 1 connectors, the input mode whose input source is "TV Audio" is fixed to ARC. 0 When an eARC function-compatible television is connected to the HDMI MONITOR 1 connector, the input mode is fixed to eARC while the input source is "TV Audio". 0 The sound mode cannot be set if the input mode is set to "7.1CH IN". Front panel Display Rear panel 193 Remote Index