Marantz SR6013 Owners Manual English - Page 156
Connection 2: Connecting using a speaker, output terminal, Connection 3 : Connection using an
View all Marantz SR6013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Contents Connections Playback o Connection 2: Connecting using a speaker output terminal When "Assign Mode" is set to "ZONE2" in the menu, ZONE2 audio is output from the SURROUND BACK speaker terminal. (v p. 205) MAIN ZONE This unit Settings Tips Appendix o Connection 3 : Connection using an external amplifier (ZONE2) The audio signals of this unit's ZONE2 audio output connectors are output to the ZONE2 amplifiers and played on these amplifiers. MAIN ZONE ZONE2 This unit Power amplifier L R AUX IN .. (R) (L) ZONE2 0 The analog audio signal and the 2-channel PCM signal input from HDMI connector or digital connectors (OPTICAL/COAXIAL) can be played back in ZONE2. 0 If you want to play back HDMI signals other than 2-channel PCM in ZONE2, set "HDMI Audio" to "PCM". (v p. 234) The output from a device connected to the input source selected for ZONE2 can be automatically converted to 2-channel PCM. In this case, the MAIN ZONE audio will also be converted to 2-channel PCM if the MAIN ZONE and ZONE2 are set to the same input source. However, depending on the playback device, the playback signal may not be converted to PCM even if this setting is configured. Front panel Display Rear panel 156 Remote Index