Marantz SR4320 SR4320 User Manual - Page 10
Remote Control In/out Jacks
View all Marantz SR4320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH ⁄2 DSS video input jack Connect to the satellite tuner's video output jack. ⁄3 DVD video input jack Connect to the DVD's video output jack. ⁄4 VCR video input/output jacks Connect the video output (PLAY) jack of the VCR to the IN jack, and connect the video input (REC.) jack to the OUT jack. ⁄5 MONITOR output jack Connect to the TV's video input (VIDEO IN) jack. ⁄6 REMOTE CONTROL IN/OUT jacks Connect to other Marantz component equipped with REMOTE CONTROL jacks. ⁄7 AC OUTLETS Connect the AC power cable of a CD player, cassette deck, etc., of your system to these outlets. The power supply from switched outlet is interlocked with the POWER switch of the receiver. The maximum power consumption of the connected components must not exceed the following limit: SWITCHED 120 WATT MAX. UNSWITCHED 120 WATT MAX. ⁄8 Speaker terminals Connect your speaker system(s) to these terminals. There are two sets of terminals, so you can connect either A and/or B speaker systems. ⁄9 AC power cord Plug into AC120V household outlet. REMOTE CONTROL UNIT The supplied remote control unit can be used to control a Marantz audio/ visual component such as a DVD player, CD player. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote control unit changes when one of the input selector buttons on the remote control unit is pressed. • Example To select the DVD as the input source and play the DVD player. Press the DVD button twice within 2 seconds. The input selector of the SR4320 is switched to DVD and the remote control unit is set for control of the DVD player. Press the PLAY button on the remote control unit. z Infrared window Outputs infrared control signals. x MAIN POWER button Press to switch the power of the SR4320 ON or STANDBY. c Transmitting indicator Lights up during a button is pressed and an infrared signal is being sent. v SOURCE POWER button Press to switch the power of the source component after pressing the function selector button. b Numeric buttons 0 to 9 These buttons are used to enter figures in the selection of a tuner preset station or to select a CD track number, etc. n MUTE button Press this button decrease the sound temporarily. Press this button again to return to the previous sound level. m SLEEP button This button is used for setting the sleep timer. , DIMMER button When this button is pressed once, the display is dimmed. When this button is pressed twice, the display is turned off and the "DISPLAY OFF" indicator lights up. Press this button again to turn on the display again. . CLEAR button This button is used to cancel for certain memory or programming operations. ⁄0 MEMO (Memory) button Memory enables button for various preset functions. ⁄1 S (Source)-DIRECT button When this button is pressed, the audio signal will bypass the balance and tone control circuit to provide the pure sound quality. ⁄2 F.DIRECT button (when tuner mode is selected) Press this button to change tuner mode to Frequency Direct Call mode. You can call your desired frequency with numeric button of the remote control unit in this mode. ⁄3 T.MODE button (when tuner mode is selected) Press this button to select the AUTO mode or MONO mode when the FM band is selected. 5