Marantz PM5003 PM5003 User Manual - English - Page 8

NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATION ENGLISH NAMES AND FUNCTIONS REMOTE CONTROLLER Using this remote controller, you can control the PM5003 and Marantz CD players, DVD players, tuners, tape decks etc. that have a remote control receptor. The operations possible by remote controller may differ with each component; therefore see the instruction manual that came with the component. The remote controller buttons are laid out as shown below. v z b x c b z POWER ON/STANDBY buttons a. MAIN POWER ON button Turns the PM5003 power on when it is in the standby mode. b. MAIN POWER STANDBY button Sets the PM5003 power to the standby mode when it is set to the power-on mode. c. SOURCE POWER button Switching the mode of a CD player, tuner, CD-R or other Marantz component equipped with a power standby function between power-on and standby is enabled by pressing this button after the FUNCTION SELECT button corresponding to the component has been pressed. When this button is pressed after pressing the TUNER button, the tuner's power is turned on; when it is pressed again, the tuner is set to the standby mode. When this button is pressed after pressing the AMP button, the PM5003 is switched from the power-on mode to the standby mode or vice versa. * The remote controller cannot be used to turn the primary power of the amplifier ON and OFF. x Input selector buttons • Input source Buttons These buttons are for directly selecting the input source. Caution Some input jacks of this unit and the corresponding input selector buttons on the remote controller differ, as shown below. The unit AUX/DVD RECORDER2 Buttons on the remote controller AUX, DVD TAPE, MD For the input sources shown in the table above, although the same jacks are used for two types of sources on the unit, separate buttons are provided on the remote controller. When using the remote controller for operation of a Marantz component connected to the unit, select the input source first, then perform operations. • INPUT 5 Button This button is for forward-feeding the input source indications to select a desired source. The input source indication, which is displayed on the function indicator on the main frame, is fed to the right. • INPUT ∞ Button This button is for backward-feeding the input source indications to select a desired source. The input source indication, which is displayed on the function indicator on the main frame, is fed to the left. c VOLUME adjustment buttons • MUTE Button This button activates the mute function. Pressing this button again releases the MUTE function. The MUTE function can also be released by pressing either the VOLUME + or - buttons. • VOLUME + Button This button increases the volume level. • VOLUME - Button This button decreases the volume level. v SOURCE DIRECT button This button turns SOURCE DIRECT mode ON and OFF. b Component operating buttons These buttons are for performing basic operations of a Marantz CD player, DVD player, etc. The function of each button changes to match the component selected as the input source using the input selector buttons. ADVANCED CONNECTION REMOTE CONTROLLER OPERATION TROUBLESHOOTING OTHERS 5