Marantz PM-KI Ruby Owners Manual English - Page 19

Overview Connections Switching the display's brightness The display brightness can be adjusted between four levels. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback. 1 Press DISPLAY. The brightness of the display switches each time DISPLAY is pressed. 0 The display brightness is set to most brightly by default. 0 If you operate the VOLUME knob or another control when the display is off, the display turns on again. When operation is finished, the display turns off automatically after approximately 2 seconds. 0 When the display brightness is set to off, the illumination lamp turns off too. Playing CDs This section uses playback from a CD as an example. 1 Press X on the main unit to turn the power on. 2 Use INPUT df to switch the input source to "CD". "CD" appears on the display. 3 Playback the CD. 4 Use VOLUME df to adjust the volume. ENGLISH Recording Audio signals input into this unit can be output to an external recording device. When recording audio from a playback device connected to this unit, audio can be recorded with the playback device still connected to this unit. 1 Press X on the main unit to turn the power on. 2 Use INPUT df to switch to the input source from which you want to record. The selected input source is displayed on the display. 3 Recording starts. 0 For information on operations, see the owner's manual of the recording device. Having the illumination lamp off 1 Press and hold DISPLAY for 2 seconds or more while the illumination lamp is lit. Press and hold DISPLAY for two seconds and longer while the lamp is always off to return to the normal setting. Playback Settings Tips Appendix 18