Marantz PM-KI Ruby Owners Manual English - Page 17

Overview Connections Playback Playback n Contents Turning the power on 16 Selecting the input source 16 Adjusting the volume 16 Turning off the sound temporarily (Muting) 16 Adjusting the volume balance (LEVEL) and sound quality (BASS/TREBLE) 17 Switching the display's brightness 18 Having the illumination lamp off 18 Playing CDs 18 Recording 18 uio
p ENTER DISPLAY X AMP REMOTE MODE AMP MODE/TRIM TONE INPUT df MUTE VOLUME df Turning the power on 1 Press X on the main unit to turn the power on. 0 The power indicator lights in blue. 0 Press X AMP on the remote control unit to turn on power from standby mode. 0 You can also turn the INPUT SELECTOR on the main unit when the unit is in standby mode to turn on the power. n Switching the power to standby 1 Press X AMP on the remote control. The unit switches to standby mode, and the STANDBY indicator lights red. NOTE 0 Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when going on vacation, either press X on the main unit to turn off the power, or unplug the power cord from the power outlet. ENGLISH Selecting the input source 1 Use INPUT df to select the input source to be played back. The selected input source appears on the display. 0 You can also select the input source by turning INPUT SELECTOR on the main unit. Adjusting the volume 1 Use VOLUME df to adjust the volume. 0 You can also adjust the volume by turning VOLUME on the main unit. Turning off the sound temporarily (Muting) 1 Press MUTE. "MUTE" appears on the display and the sound is muted. 0 To cancel mute, press MUTE again. 0 You can set the volume to be decreased when MUTE is pressed. Set this as desired through "ATT LEVEL" in the menu. (v p. 20) . Settings Tips Appendix 16