Marantz PM-15S2 PM-15S2 User Manual - English - Page 16

NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS ADVANCED CONNECTIONS ADVANCED OPERATIONS TROUBLESHOOTING ENGLISH BASIC CONNECTIONS 7 Wiring speaker cable 1. Strip away approx. 10 mm (3/8 inch) of wire insulation. 10 mm (3/8 in) 2. Twist the bared wire ends tight, to prevent short circuits. BASIC OPERATIONS AMP OPERATION 7 Turning the Unit ON 3. Loosen the knob by turning it counterclockwise. 4. Insert the bare part of the wire into the hole in side of each terminal. 5. Tighten the knob by turning it clockwise to secure the wire. POWER ON/OFF button 1. Turn on the connected audio equipment, such as a CD player. 2. Press the POWER ON/OFF button of this unit. 7 Input Source Selection Example: CD playback (Operation with the controls on the main unit) Set to CD by turning the INPUT SELECTOR knob. (Operation with the controls on the remote controller) Press the CD button on the remote controller. OPEN/ CLOSE SOUND MODE CONNECTING OF AC POWER CABLE 1. Plug the supplied AC power cable to the AC IN socket on the rear panel of the main unit. AC IN PHONO BALANCED CD RECORDER 1 LINE 1 RECORDER 2 TRIM EXIT LINE 2 TONE + CD button INPUT SELECTOR knob L R ENTER To use the speakers connected to the SPEAKER SYSTEMS terminals, press the SPEAKERS button on the front panel to set it to ON. OTHERS 2. Plug the power cable into an AC outlet. 10