Marantz MODEL 40n Owners Manual - Page 82
No sound comes out
View all Marantz MODEL 40n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 Check the connections for all devices. (v p. 19) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 20) 0 Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 20) 0 Check that the proper input source is selected. (v p. 35) 0 Adjust the volume. (v p. 35) 0 Cancel the mute mode. (v p. 35) 0 Check that the correct input source is selected when audio is being input to this unit from an external device. (v p. 35) 0 Check the digital audio output setting on the connected device. The initial settings may be off depending on the device. 0 No sound is output from the speaker terminals or the preout connector when headphones are connected. (v p. 9) 0 Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers. 0 To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. (v p. 37) Front panel Rear panel Remote control 82 unit Index