Marantz MODEL 40n Owners Manual - Page 23

Contents Connections Playback Settings Tips Appendix Connecting a playback device You can connect turntables, tuners and CD players to this unit. This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect this unit to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit's input source to "PHONO" and accidentally increase the volume without connecting a turntable, you may hear a humming noise from the speakers. Turntable Tuner AUDIO OUT RL CD player AUDIO OUT RL AUDIO OUT GND RL RL RL RL RL Bluetooth / Wi-Fi ANTENNA 5V/1A NETWORK PHONO COAXIAL OPTICAL HDMI ARC DIGITAL AUDIO IN SIGNAL GND AUDIO IN CD LINE RECORDER RECORDER SUBWOOFER IN AUDIO IN OUT AUDIO OUT PRE OUT POWER AMP IN REMOTE CONTROL SPEAKERS AC IN Bluetooth / Wi-Fi ANTENNA NOTE 0 The earth terminal (SIGNAL GND) of this unit is not for safety grounding purposes. If this terminal is connected when there is a lot of noise, the noise can be reduced. Note that depending on the turntable, connecting the ground line may have the reverse effect of increasing noise. In this case, it is not necessary to connect the ground line. 0 The PHONO input terminals are equipped with a short pinplug. Remove this plug to connect a record player. Store the removed short pin-plug in a safe place so as not to lose it. Front panel Rear panel Remote control 23 unit Index