LiftMaster TDC LiftMaster MAXUM Commercial Door Operator Overview - English - Page 30

Step 1

Page 30 highlights

Step 1 Select and configure an operator Configure your choice of MAXUM DC operator in a step-by-step process based on door weight and type, installation voltage/phase and number of daily door cycles. With a trimmed down lineup of just 26 operators, the process of ordering and stocking has been significantly simplified. All operators, JDC, JHDC and TDC, come standard with a monitored entrapment protection device. All units will include the CPS-U and NEMA 4X units will include the CPS-UN4. These entrapment protection devices are packed in and cannot be swapped out. If additional entrapment devices are needed, they can be ordered/added as an additional accessory in Step 3 of the ordering process. JDC Jackshaft Operator Model Max Door Weight JDC7S1BMC 700 lbs. Voltage/Phase 120Vac 1 PH/240Vac 1/3PH* JDC7S4BMC 700 lbs. 480Vac 3PH Equivalent Horsepower 1/2 HP 1/2 HP NEMA 4X - Cycles Per Day Standard Duty up to 90 Cycles a Day Standard Duty up to 90 Cycles a Day NOTE: 4.5 Ah Battery Backup is included as standard for the JDC family. *Convertible to 208Vac 3PH or 600Vac 3PH via transformer, ordered separately. JHDC Hoist Operators Model Max Door Weight JHDC7S1BMC 700 lbs. Voltage/Phase 120Vac 1 PH/240Vac 1/3PH* JHDC7S4BMC 700 lbs. 480Vac 3PH JHDC12S1BMC JHDC12S4BMC JHDC12X1BMC 1200 lbs. 1200 lbs. 1200 lbs. 120Vac 1 PH/240Vac 1/3PH* 480Vac 3PH 120Vac 1 PH/240Vac 1/3PH* JHDC12X4BMC JHDC22X1BMC 1200 lbs. 2200 lbs. 480Vac 3PH 120Vac 1 PH/240Vac 1/3PH* JHDC22X4BMC 2200 lbs. 480Vac 3PH JHDC12X1N4XMC 1200 lbs. 120Vac 1 PH/240Vac 1/3PH* JHDC12X4N4XMC 1200 lbs. 480Vac 3PH JHDC22X1N4XMC 2200 lbs. 120Vac 1 PH/240Vac 1/3PH* JHDC22X4N4XMC 2200 lbs. 480Vac 3PH Equivalent Horsepower 1/2 HP 1/2 HP 3/4 HP 3/4 HP 3/4 HP 3/4 HP 1 and 1.5 HP 1 and 1.5 HP 3/4 HP 3/4 HP 1 and 1.5 HP 1 and 1.5 HP NEMA 4X - Yes Yes Yes Yes Cycles Per Day Standard Duty up to 90 Cycles a Day Standard Duty up to 90 Cycles a Day Standard Duty up to 90 Cycles a Day Standard Duty up to 90 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day Extended Duty** up to 150 Cycles a Day NOTE: Phase 1 is Q1 of 2024, Phase 2 is Q3 of 2024 and Phase 3 is Q1 of 2025. JDC and JHDC maximum door height is up to 40 ft. with up to a 10 ft. high lift. *Convertible to 208Vac 3PH or 600Vac 3PH via transformer, ordered separately. **Extended Duty is formerly known as Heavy Industrial Duty or Gear Head. Launch Phase 1 1 Launch Phase 1 1 1 1 1 1 2 2 3 3 3 3 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Model
Max Door
Weight
Voltage/Phase
Equivalent
Horsepower
NEMA 4X
Cycles Per Day
Launch
Phase
JDC7S1BMC
700 lbs.
120Vac 1 PH/240Vac 1/3PH*
1²2 HP
-
Standard Duty
up to 90 Cycles a Day
1
JDC7S4BMC
700 lbs.
480Vac 3PH
1²2 HP
-
Standard Duty
up to 90 Cycles a Day
1
Model
Max Door
Weight
Voltage/Phase
Equivalent
Horsepower
NEMA 4X
Cycles Per Day
Launch
Phase
JHDC7S1BMC
700 lbs.
120Vac 1 PH/240Vac 1/3PH*
1²2 HP
±
Standard Duty
up to 90 Cycles a Day
1
JHDC7S4BMC
700 lbs.
480Vac 3PH
1²2 HP
±
Standard Duty
up to 90 Cycles a Day
1
JHDC12S1BMC
1200 lbs.
120Vac 1 PH/240Vac 1/3PH*
3²4 HP
-
Standard Duty
up to 90 Cycles a Day
1
JHDC12S4BMC
1200 lbs.
480Vac 3PH
3²4 HP
-
Standard Duty
up to 90 Cycles a Day
1
JHDC12X1BMC
1200 lbs.
120Vac 1 PH/240Vac 1/3PH*
3²4 HP
±
Extended Duty**
up to 150 Cycles a Day
1
JHDC12X4BMC
1200 lbs.
480Vac 3PH
3²4 HP
±
Extended Duty**
up to 150 Cycles a Day
1
JHDC22X1BMC
2200 lbs.
120Vac 1 PH/240Vac 1/3PH*
1 and 1.5 HP
±
Extended Duty**
up to 150 Cycles a Day
2
JHDC22X4BMC
2200 lbs.
480Vac 3PH
1 and 1.5 HP
±
Extended Duty**
up to 150 Cycles a Day
2
JHDC12X1N4XMC
1200 lbs.
120Vac 1 PH/240Vac 1/3PH*
3²4 HP
Yes
Extended Duty**
up to 150 Cycles a Day
3
JHDC12X4N4XMC
1200 lbs.
480Vac 3PH
3²4 HP
Yes
Extended Duty**
up to 150 Cycles a Day
3
JHDC22X1N4XMC
2200 lbs.
120Vac 1 PH/240Vac 1/3PH*
1 and 1.5 HP
Yes
Extended Duty**
up to 150 Cycles a Day
3
JHDC22X4N4XMC
2200 lbs.
480Vac 3PH
1 and 1.5 HP
Yes
Extended Duty**
up to 150 Cycles a Day
3
Select and configure
an operator
Step 1
JDC Jackshaft Operator
JHDC Hoist Operators
NOTE:
Phase 1 is Q1 of 2024, Phase 2 is Q3 of 2024 and Phase 3 is Q1 of 2025. JDC and JHDC maximum door height is up to
40 ft. with up to a 10 ft. high lift.
*Convertible to 208Vac 3PH or 600Vac 3PH via transformer, ordered separately.
**Extended Duty is formerly known as Heavy Industrial Duty or Gear Head.
NOTE:
4.5 Ah Battery Backup is included as standard for the JDC family.
*Convertible to 208Vac 3PH or 600Vac 3PH via transformer, ordered separately.
Configure your choice of MAXUM DC operator
in a step-by-step process based on door weight
and type, installation voltage/phase and number
of daily door cycles. With a trimmed down lineup
of just 26 operators, the process of ordering and
stocking has been significantly simplified.
All operators, JDC, JHDC and TDC, come standard
with a monitored entrapment protection device.
All units will include the CPS-U and NEMA 4X
units will include the CPS-UN4. These entrapment
protection devices are packed in and cannot be
swapped out.
If additional entrapment devices are
needed, they can be ordered/added as an additional
accessory in Step 3 of the ordering process.
28