LiftMaster JDC Installation Manual - English French Spanish - Page 30
Door Settings, Set Limits, Monitored Eyes/Edge Configuration
View all LiftMaster JDC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Programming (continued) NOTE: Please obtain the latest Installation Manual by search the model number at liftmaster.com. SELECT DOOR SETTINGS SECTIONAL DOORS STANDARD, HIGH LIFT AND VERTICAL 1. To select Door Hanging, Cable Drum (and Sprocket JHDC/ JDC) settings, navigate to the SYSTEM SETTINGS > DOOR SETTINGS submenu. 2. Select The Drum Type. Correct Drum Types are required for the correct door profile to run the system. a. Standard Lift choices: D400-96, D400-144, D5250-18, D525-216, D800-384** b. Full Vertical choices: D850-132, D1100-216, D1350-336 c. High Lift choices: 48° HL, D400-54, D525-54, 60° HL: D575-120, 144° HL: D6375-164 3. Sprocket FOR JHDC / JDC (ONLY) If you have a different sprocket size, use Custom option to add your tooth sprocket. 700lb operators - Standard Lift, High Lift and Full Vertical 16 tooth sprocket recommended 1200lb operators - Standard Lift, High Lift and Full Vertical 22 tooth sprocket recommended 2200lb operators - Standard Lift, High Lift and Full Vertical 32 tooth sprocket recommended (Vertical with D1350336 - 42 tooth sprocket recommended) Any other tooth configuration, please use Custom Option and enter your sprocket info. ROLLING DOOR 1. Select Rolling Door 2. Select Insulated or Non-Insulated Door Type 3. Select Height (increment of 2') a. 8', 10', 12', 14', 16', 18', up to 40' 4. Select Width (increment of 2') a. 8', 10', 12', 14', 16', 18', up to 40' 5. Select Sprocket (SKU dependent, please reference page 4) a. Sprocket choices: 50, 60, 72, 82, Custom IMPORTANT: Once you choose your drum, allow inverter parameter to update. Once the inverter is updated, you can re-enter the menu to set limits and learn force. SET LIMITS IMPORTANT: When setting limit positions, it is important that the door runs in the direction of the intended limit. Example: When setting the close limit, only use the CLOSE button. When setting the open limit, only use the OPEN button. Using the opposite direction button will cause the limit positions to drift over time. To set limits, navigate to the SYSTEM SETTING > DOOR POSITIONS submenu. Door Position Door Position Open Limit Door Position Close Limit Door Position Open Mid-Stop Door Position Close Mid-Stop MONITORED EYES/EDGE CONFIGURATION If monitored entrapment protection devices are wired to the system during the initial power-up, they will be learned to the system, and the operating mode will automatically switch to B2. If no monitored sensor is attached, the system will default to C2 mode. To manually program an entrapment protection device, navigate to the SYSTEM SETTINGS > MONITORED EYES/EDGES submenu, otherwise it will Auto-Learn the monitored device. Monitored Eyes/Edges Auto-Learn All Eye/Edge 1 XXXXX Eye/Edge 2 XXXXX Eye/Edge 3 XXXXX 30