LiftMaster CSW24V CSW24V Manual - Page 20

WIRING WIRELESS DUAL GATES Turn on power to the operator. DUAL GATES ONLY TO ACTIVATE THE WIRELESS FEATURE: 1 Choose an operator to be the network primary operator. All wireless accessories will need to be programmed to the primary operator. 2 Press and release the LEARN RADIO button on the primary operator. The green XMITTER LED will light. 3 Press and release the LEARN RADIO button again on the primary operator. The NETWORK LED will light. 4 Press and release the OPEN test button to assign this operator as network primary. 5 Press and release the LEARN RADIO button on the second operator. The green XMITTER LED will light. 6 Press and release the LEARN RADIO button again on the second operator. The NETWORK LED will light. 7 Press and release the CLOSE test button to assign this operator as network second. Both operators will beep and the NETWORK LEDs will turn off indicating programming is successful. TO DEACTIVATE THE WIRELESS FEATURE: 1 Press and release the LEARN RADIO button on either operator. The green XMITTER LED will light. 2 Press and release the LEARN RADIO button again on the same operator. The yellow NETWORK LED will light. 3 Press and hold the LEARN RADIO button for 5 seconds. The yellow NETWORK LED will blink (operator will beep) then turn off indicating successful deactivation. Repeat the steps for the other operator. DUAL GATES ONLY RESET ALARM 18