LiftMaster CSL24ULWK Installation Manual - Page 14
Step 4 Install Entrapment Protection, Definitions
View all LiftMaster CSL24ULWK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
INSTALLATION To prevent SERIOUS INJURY or DEATH from a moving gate: l ALL gate operator systems REQUIRE two independent entrapment protection systems for each entrapment zone. l Entrapment protection devices MUST be installed to protect anyone who may come near a moving gate. l Locate entrapment protection devices to protect in BOTH the open and close gate cycles. l Locate entrapment protection devices to protect between moving gate and RIGID objects, such as posts, walls, pillars, columns, or operator itself. Step 4 Install Entrapment Protection Entrapment protection MUST be installed according to the following UL 325 requirements: l Slide gate operators require a minimum of two external monitored entrapment protection devices to function; one in the open direction and one in the close direction. l Every installation is unique. It is the responsibility of the installer to ensure that ALL entrapment zones are protected with an external monitored entrapment protection device, protecting both the open and close gate cycles. l LiftMaster monitored external entrapment protection devices MUST be used with LiftMaster operators to meet UL325 requirements, see Accessories. l Test ALL entrapment protection devices after completing installation of the operator. For testing instructions, refer to the manual provided with your entrapment protection device. Definitions ENTRAPMENT: The condition when a person is caught or held in a position that increases the risk of injury. SLIDE GATE ENTRAPMENT ZONE: An entrapment zone exists if at any point during travel, the gap between the gate and any opposing fixed edge or surface such as posts, walls, pillars, columns or operator itself, is less than 16" (406 mm) in a location up to 6 ft. (1.8 m) above grade. Illustrations provided by DASMA Gate Systems Safety Guide 14