LiftMaster CAPXLV LiftMaster CAPXL CAPXLV Installation Readiness Survey - Engl - Page 2
TIP: USE a Wi-Fi Analyzer tool - capxl video
View all LiftMaster CAPXLV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
2. CONNECTION METHOD (CHOOSE ONE) Component: ❏ OPTION 1: WIRED (Select one type): ❏ DSL ❏ Cable ❏ Fiber ISP ❏ OPTION 2: WIRELESS (Wi-Fi™ ) Wi-Fi network name: Wi-Fi password: The dBm Signal Strength is between -30 dBm and -67 dBm. (TIP: USE a Wi-Fi Analyzer tool to measure this. See Fig. 2 on the next page.) 3. SIP PROVIDER Component: Result (Circle) - Yes / No Result (Circle) Phone service (SIP provider) is Phone.com (Required for video) Yes / No Verified √: ❏ Verified √: ❏ 4. INTERNET PROTOCOL Component: Internet Protocol (Select one type): ❏ Dynamic Host Configuration Protocol (DHCP). Any device can connect. ❏ Static IP (Assigned to be recognized with specific parameters listed below.) FOR STATIC IP IP Address: Netmask: Gateway Address: Primary Domain Name Service (DNS): Secondary DNS: Tertiary DNS : 5. PHYSICAL CABLING SPECIFICATIONS Component: Existing cabling is CAT 6 or greater for new installations. (CAT 5e is adequate for existing installations.) The cabling from router to CAPXL/CAPXLV installation point is less than 300' cabling length. Patch Cable follows confi guration (for router or switch) in Fig. 1 on the next page. Result (Circle) DHCP / Static IP Result (Circle) Yes / No Yes / No Yes / No Verified √: ❏ Verified √: ❏ ❏ ❏ Action Needed Date Completed If No, you need to adjust the distance from the router to the control. Action Needed If No, see step 6 and establish Phone.com service in the app's Device Management tab. Date Completed Action Needed Date Completed If Static IP, provide the additional specifications below. Action Needed If No, recabling using CAT 6 or greater is required. Consult with your service provider to replace the cable. If No, you need to adjust and shorten the distance between the internet router and the unit. Date Completed 2