LiftMaster 8550W 8550W Owners Manual - Page 12
Attach the Rail to the Header Bracket, 4 Position the Garage Door Opener
View all LiftMaster 8550W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation 3 Attach the Rail to the Header Bracket 1. Align the rail with the header bracket. Insert the clevis pin through the holes in the header bracket and rail. Secure with the ring fastener. NOTE: Use the packing material as a protective base for the garage door opener. HARDWARE Clevis Pin 5/16" x 2-3/4" Ring Fastener 4 Position the Garage Door Opener To prevent damage to garage door, rest garage door opener rail on 2x4 placed on top section of door. 1. Remove the packing material and lift the garage door opener onto a ladder. 2. Fully open the door and place a 2x4 (laid flat) under the rail. A 2x4 is ideal for setting the distance between the rail and the door. If the ladder is not tall enough you will need help at this point. If the door hits the trolley when it is raised, pull the trolley release arm down to disconnect the inner and outer trolley. Slide the outer trolley toward the garage door opener. The trolley can remain disconnected until instructed. Ring Fastener Clevis Pin 5/16" X 2-3/4" Connected Disconnected 12