Lexmark XM3250 Quick Reference - Page 2

2 Adjust the paper guides to match the size of the paper that you are loading. 3 Flex, fan, and align the paper edges before loading. Notes: • Load letterhead facedown with the top edge of the sheet toward the front of the tray for one‑sided printing. • Load letterhead faceup with the bottom edge of the sheet toward the front of the tray for two‑sided printing. • Do not slide paper into the tray. • To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator. 5 Insert the tray. If necessary, set the paper size and paper type from the control panel to match the paper loaded. Loading the multipurpose feeder 1 Open the multipurpose feeder. 2 Adjust the guide to match the size of the paper that you are loading. 3 Flex, fan, and align the paper edges before loading. 4 Load the paper stack with the printable side facedown, and then make sure that the side guides fit snugly against the paper. 4 Load paper with the printable side faceup. Notes: • Load letterhead faceup with the top edge of the sheet toward the front of the tray for one‑sided printing. • Load letterhead facedown with the bottom edge of the sheet toward the front of the tray for two‑sided printing. • Load envelopes with the flap facedown on the left side. • Load European envelopes with the flap facedown and entering the printer first. Warning-Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. 5 From the control panel, set the paper size and paper type to match the paper loaded. 2