Lexmark C770n SCS/TNe Emulation User’s Guide - Page 58
Address, Netmask, Gateway, Enable DHCP, You will need to contact your network administrator
UPC - 734646001151
View all Lexmark C770n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3 Set the TCP/IP option values shown in the table below. Select Menus > Network/Ports > TCP/IP. You will need to contact your network administrator for several of the values. You will need to contact your network administrator for several of the values. TCP/IP Option Address Netmask Gateway Enable DHCP Value Description Address available from your network administrator. Netmask for your network. Contact your network administrator. Address of the IP gateway. Contact your network administrator. On or Off On, if you use a DHCP server. Off, if you set the IP address another way. AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server 58
58
AS/400 and iSeries Installation Setup:
Task 2 - Configuring a Print Server
3
Set the
TCP/IP
option values shown in the table below.
Select
Menus > Network/Ports > TCP/IP
. You will need to
contact your network administrator for several of the values.
You will need to contact your network administrator for
several of the values.
TCP/IP Option
Value
Description
Address
Address available from your network
administrator.
Netmask
Netmask for your network. Contact your network
administrator.
Gateway
Address of the IP gateway. Contact your network
administrator.
Enable DHCP
On or Off
On, if you use a DHCP server.
Off, if you set the IP address another way.