Lexmark C770n SCS/TNe Emulation User’s Guide - Page 160
Connect # Status, Negotiating with TN server, Not Con d, SERVER # INFO, Print Inactive
UPC - 734646001151
View all Lexmark C770n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Connect # Status This Connection# option displays the connection status with the host. The option cannot be changed by the user. The first part of the line shows the primary status message of the connection followed by a last response message received from the host. The complete status message text may not be displayed. Refer to the tables below. Connect # Status: Primary status messages Negotiating with TN server Not Configured Print Inactive * Reconnecting session Comments The SCS/TNe Emulation has contacted the host succesfully and is negotiating the Telnet communications parameters. The IP # Address, Hostname #, Device # Name, MSGQ # Name, or MSGQ # Lib in the TN5250E SERVER # INFO menu has not been configured. One of the following conditions exists and is preventing a session from being estalished. 1 Print Active = No. Solution: Set to Yes. (Path: Menus > Option Card Menu > SCS/TNe MENU > TN5250E SETUP > CONNECTION #). 2 NPA Mode = Off. Solution: Set to Auto. (Path: Menus > Network/Ports > print server to be used for SCS printing > NPA Mode). 3 Cable is not plugged into print server. Plug in cable. 4 Network is down. Check network. The Telnet session was disconnected. The SCS/TNe Emulation is attempting to reconnect. Operations - TN5250E SETUP: CONNECTION # > Connect # Status 160