LevelOne VOI-8003 Manual - Page 23
Line con Line Feature, Routing Setting/VoIP Call
View all LevelOne VOI-8003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4.2.2.4 Line configure/ Line Feature /VoIP Setup/Line Configure/ Line Feature This page defines the feature on the phone port of the VoIP Gateway. A. Dial Pause signal length(as ,)[100~3000] ms: Define the pause time (ms) of the "," on the /Routing Setting/VoIP Call Out/. This pause time is usually for time delay when connect to PBX and used for seize the CO line. The default pause time is 1000ms. The input range is between 100 to 3000 ms. User can use more then one "," to get longer delay time. B. Loop Current Drop & Polarity Reversal Generate: Define the signal generated on local side when remote side disconnects: z Disable: Disable the Loop current Drop and Polarity Reversal Generate signal, only generate busy tone. z Polarity Reversal-> Enable: Enable FXS interface to generate the Polarity Reversal Signal. z Current Drop-> 1 S: Enable FXS interface to generate one second Current Drop signal. z Current Drop-> 2 S: Enable FXS interface to generate two seconds Current Drop signal. 23