Lantronix XPort Direct Demonstration Kit XChip Direct - User Guide - Page 25

Setup Mode: Channel Configuration, Channel 1 (Option 1), Baudrate

Get Lantronix XPort Direct Demonstration Kit PDF manuals and user guides View all Lantronix XPort Direct Demonstration Kit manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

6: Setup Mode: Channel Configuration This chapter explains how to configure the serial port. Notes: ‹ Current values display in parenthesis. ‹ You must enter some values in hexadecimal notation. (See A: Converting Binary to Hexadecimal.) Channel 1 (Option 1) Select Channel 1 (option 1) from the Change Setup menu to define how the serial port responds to network and serial communications. The following sections describe the configurable parameters within the Channel configuration menu. Figure 6-1. Serial Port Parameters Baudrate The unit and attached serial device, such as a modem, must agree on a speed or baud rate to use for the serial connection. Valid baud rates are 300, 600, 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, and 230400 bits per second. Baudrate (9600) ? _ DeviceLinx™ XPort Direct/XChip Direct SoC User Guide 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
DeviceLinx™
XPort Direct/XChip Direct SoC User Guide
25
6: Setup Mode: Channel Configuration
This chapter explains how to configure the serial port.
Notes:
Current values display in parenthesis.
You must enter some values in hexadecimal notation.
(See A: Converting Binary to Hexadecimal.)
Channel 1 (Option 1)
Select
Channel 1
(option
1)
from the
Change Setup
menu to define how the serial
port responds to network and serial communications. The following sections describe
the configurable parameters within the
Channel
configuration menu.
Figure 6-1. Serial Port Parameters
Baudrate
The unit and attached serial device, such as a modem, must agree on a speed or
baud rate to use for the serial connection. Valid baud rates are 300, 600, 1200, 2400,
4800, 9600 (default), 19200, 38400, 57600, 115200, and 230400 bits per second.
Baudrate (9600) ? _