Lantronix SLC 8 Lantronix SLC - User Guide - Page 37
To complete the quick setup, Enter, xx.xx.xx.xx, login, sysadmin,
View all Lantronix SLC 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4: Quick Setup To complete the quick setup: 1. Do one of the following: With a serial terminal connection, power up, and when the command line displays, press Enter. With a network connection, use an SSH program or Telnet program (if Telnet has been enabled) to connect to xx.xx.xx.xx (the IP address in dot quad notation), and press Enter. You should be at the login prompt. 2. Enter sysadmin as the user name and press Enter. 3. Enter PASS as the password and press Enter. The first time you log in, the Quick Setup script runs automatically. Normally, the command prompt displays. Figure 4-6 Quick Setup Screen Using CLI Welcome to the SLC Console Manager Model Number: SLC48 Quick Setup will now step you through configuring a few basic settings. The current settings are shown in brackets ('[]'). You can accept the current setting for each question by pressing . 4. Enter the following fields. Note: To accept a default or to skip an entry that is not required, press Enter. Configure Eth1 IP Address (if specifying) Select one of the following: obtain IP Address from DHCP: The unit will acquire the IP address, subnet mask, hostname and gateway from the DHCP server. (The DHCP server may or may not provide the hostname and gateway, depending on its setup.) This is the default setting. obtain IP Address from BOOTP: Permits a network node to request configuration information from a BOOTP "server" node. static IP Address: Allows you to assign a static IP address manually. The IP address is generally provided by the system administrator. An IP address that will be unique and valid on your network and in the same subnet as your PC. There is no default. If you selected DHCP or BOOTP, this prompt does not display. Enter all IP addresses in dot-quad notation. Do not use leading zeros in the fields for dot-quad numbers less than 100. For example, if your IP address is 172.19.201.28, do not enter 028 for the last segment. Note: Configurations with the same IP subnet on multiple interfaces (Ethernet or PPP) are not currently supported. SLC™ Console Manager User Guide 37