Lantronix SLC 8 Lantronix SLC - User Guide - Page 227
Diagnostic Commands, diag arp, diag internals, diag lookup, diag loopback
View all Lantronix SLC 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
15: Command Reference Description Displays the modes and states of one or more device port(s). You can optionally email the displayed information. Diagnostic Commands diag arp Syntax diag arp [email ] Description Displays the ARP table of IP address-to-hardware address mapping. You can optionally email the displayed information. diag internals Syntax diag internals Description Displays information on the internal memory, storage and processes of the SLC console manager. diag lookup Syntax diag lookup [email ] Description Resolves a host name into an IP address. You can optionally email the displayed information. diag loopback Syntax diag loopback [] Parameters test xferdatasize (Default is 1 Kbyte.) Description Tests a device port by transmitting data out the port and verifying that it is received correctly. A special loopback cable comes with the SLC console manager. To test a device port, plug the cable into the device port and run this command. The command sends the specified Kbytes to the device port and reports success or failure. The test is performed at 9600 baud. Only an external test requires a loopback cable. SLC™ Console Manager User Guide 227