Kyocera FS-C5250DN 120V FS-C5150DN/5250DN Operation Guide - Page 178

Appendix Expansion Memory Modules The printer's main controller board has a memory slot into which you can plug in optional memory modules (dual in line memory modules). You can increase the printer's memory up to 1,280 MB by plugging in the optional memory modules. Note A 256 MB memory module is already installed at the factory. To expand memory up to 1,280 MB, install 1,024 MB memory module. YES Expansion Memory Modules You can select additional memory modules from 128, 256, 512 or 1,024 MB. The maximum memory size is 1,280 MB. Precautions for Handling the Printer's Main Controller Board and Memory Modules To protect electronic parts, discharge static electricity from your body by touching a water pipe (faucet) or other large metal object before handling the memory modules. Or, wear an antistatic wrist strap, if possible, when you install the memory modules. Always hold the main controller board or a memory module by its edges as shown below to avoid damaging electronic parts. NO Installing the Memory Modules IMPORTANT Remove any USB memory that is attached to the printer's USB memory slot. 1 Power off the printer and unplug the printer power cord. 2 Pull the right cover of the printer toward you and remove. A-6