Kyocera ECOSYS M6530cdn Kyocera Command Center RX User Guide Rev-2014.2 - Page 37
Printer
View all Kyocera ECOSYS M6530cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Printer Function Settings This section includes advanced settings for printing. If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. General 1. Click Printer under Function Settings on the navigation menu. The Printer Settings page opens. 2. You can make changes for the following items as required. Emulation Set the Emulation Mode. Alternate Emulation When you have selected KPDL(Auto) as emulation mode, you can switch between KPDL and another emulation mode (alternative emulation) automatically according to the data to print. This item can be displayed when an optional Emulation kit is installed. Paper Feed Mode Determines the behavior of paper feed selection when the paper you requested of size and/or type is not available in the current paper source. Auto lets the machine to search for the matching paper including all the paper sources. Fixed does not perform searching in the other paper sources. Form Feed Timeout Adjusts the form feed timeout between 5 and 495 seconds in 5-second increments. A form feed will occur in the absence of data during this time period. The default setting is 30 seconds. Job Name Select the job number, job name, etc. User Name Activate or deactivate to use User Name. Message Banner Print Each time a banner page is printed, the machine halts and displays a message that prompts you to continue banner printing. You can activate (On) or deactivate (Off) this message. Wide A4 Activate (On) or deactivate (Off) Wide A4 size for printing. Remote Printing Permit or prohibit remote printing. 3. Click Submit button. User Guide 33