Kyocera ECOSYS M6530cdn Kyocera Command Center RX User Guide Rev-2014.2 - Page 34
Default Output Settings, Common/Job Default Setting - scan to email
View all Kyocera ECOSYS M6530cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Function Settings Continuous Scan (Fax) Activates or deactivates Continuous Scan for fax. Border Erase Set the width of the outer and inner borders to erase in 0 to 50mm. You can set border erase for the reverse side. Prevent Bleed-through (Copy) Activate or deactivate Prevent Bleed-through for copying. Prevent Bleed-through (Send/Store) Activate or deactivate Prevent Bleed-through for sending and storing. 3. Click Submit button. Default Output Settings 1. Click Common/Job Defaults under Function Settings on the navigation menu. The Common/Job Default Settings page opens. 2. You can make changes for the following items as required. EcoPrint Switches EcoPrint On or Off to control toner consumption for saving the printing costs. The default setting is Off. When selecting On, you can select Toner Save Level from 1 (Low) to 5 (High). Margin You increase or decrease the top and left gutters from -18 to +18mm. JPEG/TIFF Print This determines the physical size of JPEG images when printing them from a USB flash device. Choices include Fit to Paper Size, Image Resolution, and Fit to Print Resolution. XPS Fit to Page This determines the page size for printing XPS data. Turn On to fit print data over the page size and turn Off to print in the original size. Collate/Offset Select the default collate/offset settings. When Collate is set to On, the documents are collated by copy (Offset is set to Each Set). When Collate is set to Off, the documents are collated by page (Offset is set to Off). FAX TX Resolution This selects the resolution to fax a document. E-mail Template This allows to create a template for entering a subject and body information of Email. Up to three templates can be created and configured with the default settings. 30 Embedded Web Server