Kyocera ECOSYS M6530cdn ECOSYS M6030cdn/M6530cdn Operation Guide - Page 222
Print Override, Quiet Mode, Skip Blank Level, Middle, Prohibit
View all Kyocera ECOSYS M6530cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 222 highlights
Using Various Functions > Functions Print Override Copy Print from Box Print from USB Suspends the current job and gives a new job top priority. The suspended job resumes after the other job is finished. (Value: [Off] / [On]) NOTE • This function is not available if current job was an override. • Print override may not be available depending on the status of the current print job and memory usage. Quiet Mode Copy Print from Box Print from USB Send Scan to USB Lower print and scan speed for quiet processing. Select this mode when the running noise is uncomfortable. It is possible to set the use of Quiet Mode for each function, such as copying and sending. (Value: [Off] / [On]) NOTE • The processing speed will be slower than normal when in Quiet Mode. • This cannot be used when [Prohibit] is set for "Each Job". Each Job (page 8-34) Skip Blank Page Copy Send Scan to USB When there are blank pages in a scanned document, this function skips the blank pages and prints only pages that are not blank. When set to [High], the level at which blank paper is recognized is higher. The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the document. Select [On], [Level], and then [Low], [Middle] or [High]. NOTE The originals with punched holes or originals printed on a colored substrate may not be recognized as blank pages. 6-25