KitchenAid W10655448 Instruction Sheet - Page 2

INSTALLATION INSTRUCTIONS Mark Guide Lines 1. Mark a small line on the backwall at the height of the range or cooktop. 2. Measure 1 3/8" down from this line and draw a level line the full length of the installation space. This line represents the bottom edge of backsplash line. 3. Position the bottom edge of the flange along the bottom edge of backsplash line. Align the center of the backsplash with the center of the appliance. Mark each mounting hole (2 locations) with a pencil. Set panel aside. 4. Measure up 6 3/8" from the bottom edge of backsplash line and draw a level line the full length of the installation space. This mounting bracket guide line represents where the mounting brackets will attach to the wall. 1 3/8" Center Line Mounting Bracket Guide Line 6 3/8" Bottom Edge of Backsplash Range/Cooktop Height Install Mounting Brackets 1. Using a stud finder, locate the edges of the wall studs within the installation space. 2. Mark the center of each stud and draw a line down the center of the stud. 3. Line up the top of the wall mounting bracket with the mounting bracket guide line from "Mark Guide Lines" section. 4. Center a bracket along the centerline of each wall stud. 5. Mount each bracket to wall using two 10-12 x 2" screws per bracket (included with kit). A minimum of two mounting brackets should be installed for the 30" models. Align this surface with the mounting bracket guide line Install Backsplash 1. Hook the flange on the back of the Backsplash over the mounting brackets attached to the wall. 2. Center the Backsplash and align the two holes at the bottom of the Backsplash with the marks on the wall made in the "Mark Guide Lines" section. 3. Attach bracket to wall using the two 10-12 x 2" screws through the holes at the bottom of the flange. BACKSPLASH USE & CARE General Cleaning Do not use soap-filled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel-wool pads, gritty washcloths or abrasive paper towels. Damage may occur, even with one-time or limited use. Rub in direction of grain to avoid damaging. Cleaning Method: • Affresh® Stainless Steel Cleaner and Polish: Follow the instructions found on the label of the cleaner. • Liquid detergent or all-purpose cleaner: Rinse with clean water and dry with soft, lint-free cloth. W10758628A 2