KitchenAid KOED530PPS Control Guide - Page 5

Displays, Start, Cancel, Tones, Volume, End-of-Cycle, Reminder, Fahrenheit, Celsius, Tools,

Page 5 highlights

Display(s) When power is first supplied to the oven, the timer display will flash "12:00," and "Clock-Enter Time" will appear on the display. Enter the time by touching the number keys. Touch START to allow operation. To allow operation without setting a time, touch START or CANCEL. Lower Oven Display (combination oven models) When the lower oven is in use, this display shows the oven temperature, heat source(s) and start time. In addition, during Timed Cooking, this display shows a time countdown and the stop time (if entered). If "Err" appears on the lower oven display, an error condition has occurred. To call for service, see the Quick Start Guide for contact information. Time of Day, Timer Display When the lower oven is not in use, this display shows the time of day or time countdown. Upper Microwave Oven Display (combination oven models) When the upper microwave oven is in use, this display shows the upper oven heat source(s), cooking power, quantities, weights and/or help prompts and time countdown. When the upper microwave oven is not in use, this display is blank. Start START begins all oven functions except Sabbath Mode. If the Start key is not touched within 5 seconds after touching another key, "START?" will appear on the lower oven display as a reminder. Depending on your model, if the Start key is not touched within 5 minutes after touching another key, the lower oven display will return to inactive mode and the programmed function will be canceled. Cancel Lower Oven CANCEL stops oven functions except for the Clock, Kitchen Timer and Control Lock. The oven cooling fan(s) may continue to operate even after an oven function has been canceled or completed, depending on the oven temperature. Tones Tones are audible signals, indicating the following: Oven beep � Valid key touch � Function has been entered One chime � Preheat cycle has been completed Three beeps � Invalid key touch Three chimes � End of a cooking cycle Four chimes � When timer reaches zero Includes using the Kitchen Timer for functions other than cooking. Tone Volume The volume is preset at low, but can be changed to high. To Change: Touch Tools, and then "4" to toggle volume between high and low settings. All Tones All tones are preset on, but can be turned off. To Turn Off/On: Touch Clock/Tools, and then "3" to toggle tones between on/off settings. End-of-Cycle and Reminder Tones The Timed Cooking end-of-cycle and reminder tones are preset on, but can be turned off. If all tones have been turned off, the end-of-cycle and reminder tones cannot be independently turned on. To Turn Tones Off/On: Touch Clock/Tools, and then "5" to turn On. Touch Clock/Tools and then "5" to turn Off. NOTE: Turning off this reminder tone does not turn off the Kitchen Timer tone. Fahrenheit and Celsius The temperature is preset in Fahrenheit; however it can be changed to Celsius. To change: Touch Clock/Tools, and then "2" to toggle temperature between Fahrenheit and Celsius settings. When the temperature is in Fahrenheit, "°F" follows the oven temperature. When the temperature is in Celsius, "°C" follows the oven temperature. Tools (Combination Oven Models) The Tools selection key allows you access to 10 hidden functions within the Electronic Oven Control. These hidden functions allow you to set the clock, change the oven temperature between Fahrenheit and Celsius, turn the audible signals and prompts on and off, adjust the oven calibration, change language and turn on demo mode. The Sabbath Mode is also set using the Tools selection key. To Use: Touch Tools . The oven display will scroll through the various tools, starting at "1" and ending automatically at "0." You can also touch Clock/Tools repeatedly to manually scroll through the list of tools. TOOLS 1 2 3 4 HIDDEN FUNCTION Clock Fahrenheit and Celsius conversion Sound On/Off Sound High/Low 5 End tone On/Off 6 Calibration 7 Sabbath Mode 8 Turntable On/Off 9 Language 0 Demo Mode Clock This is a 12-hour clock. Before setting, make sure the oven(s), Kitchen Timer, and Timed Cooking are off. To Set: 1. Touch Clock/Tools. 2. Touch the "1" key. 3. Touch the number keys to set the time of day. 4. Touch Start. Kitchen Timer The Kitchen Timer can be set in minutes and seconds or hours and minutes, and counts down the set time. NOTE: The Kitchen Timer does not start or stop the oven. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

5
Display(s)
When power is first supplied to the oven, the timer display will
flash “12:00,” and “Clock-Enter Time” will appear on the display.
Enter the time by touching the number keys. Touch START to
allow operation. To allow operation without setting a time, touch
START or CANCEL.
Lower Oven Display (combination oven models)
When the lower oven is in use, this display shows the oven
temperature, heat source(s) and start time. In addition, during
Timed Cooking, this display shows a time countdown and the
stop time (if entered).
If “Err” appears on the lower oven display, an error condition has
occurred. To call for service, see the Quick Start Guide for
contact information.
Time of Day, Timer Display
When the lower oven is not in use, this display shows the time of
day or time countdown.
Upper Microwave Oven Display (combination oven models)
When the upper microwave oven is in use, this display shows the
upper oven heat source(s), cooking power, quantities, weights
and/or help prompts and time countdown.
When the upper microwave oven is not in use, this display is
blank.
Start
START begins all oven functions except Sabbath Mode. If the
Start key is not touched within 5 seconds after touching another
key, “START?” will appear on the lower oven display as a
reminder. Depending on your model, if the Start key is not
touched within 5 minutes after touching another key, the lower
oven display will return to inactive mode and the programmed
function will be canceled.
Cancel
Lower Oven CANCEL stops oven functions except for the Clock,
Kitchen Timer and Control Lock. The oven cooling fan(s) may
continue to operate even after an oven function has been
canceled or completed, depending on the oven temperature.
Tones
Tones are audible signals, indicating the following:
Oven beep
Valid key touch
Function has been entered
One chime
Preheat cycle has been completed
Three beeps
Invalid key touch
Three chimes
End of a cooking cycle
Four chimes
When timer reaches zero Includes using the Kitchen Timer
for functions other than cooking.
Tone
Volume
The
volume
is
preset
at
low,
but
can
be
changed
to
high.
To
Change:
Touch
T
ools
,
and
then
“4”
to
toggle
volume
between
high
and
low
settings.
All
Tones
All
tones
are
preset
on,
but
can
be
turned
off.
To
Turn
Off/On:
Touch
Clock/Tools
,
and
then
“3”
to
toggle
tones
between
on/off
settings.
End-of-Cycle
and
Reminder
Tones
The
Timed
Cooking
end-of-cycle
and
reminder
tones
are
preset
on,
but
can
be
turned
off.
If
all
tones
have
been
turned
off,
the
end-of-cycle
and
reminder
tones
cannot
be
independently
turned
on.
To
Turn
Tones
Off/On:
Touch
Clock/Tools
,
and
then
“5”
to
turn
On.
Touch
Clock/Tools
and
then
“5”
to
turn
Off.
NOTE:
Turning
off
this
reminder
tone
does
not
turn
off
the
Kitchen
Timer
tone.
Fahrenheit
and
Celsius
The
temperature
is
preset
in
Fahrenheit;
however
it
can
be
changed
to
Celsius.
To
change:
Touch
Clock/Tools
,
and
then
“2”
to
toggle
temperature
between
Fahrenheit
and
Celsius
settings.
When
the
temperature
is
in
Fahrenheit,
“°F”
follows
the
oven
temperature.
When
the
temperature
is
in
Celsius,
“°C”
follows
the
oven
temperature.
Tools
(Combination
Oven
Models)
The
T
ools
selection
key
allows
you
access
to
10
hidden
functions
within
the
Electronic
Oven
Control.
These
hidden
functions
allow
you
to
set
the
clock,
change
the
oven
temperature
between
Fahrenheit
and
Celsius,
turn
the
audible
signals
and
prompts
on
and
off,
adjust
the
oven
calibration,
change
language
and
turn
on
demo
mode.
The
Sabbath
Mode
is
also
set
using
the
Tools
selection
key.
To
Use:
Touch
Tools
.
The
oven
display
will
scroll
through
the
various
tools,
starting
at
“1”
and
ending
automatically
at
“0.”
You
can
also
touch
Clock/Tools
repeatedly
to
manually
scroll
through
the
list
of
tools.
TOOLS
HIDDEN FUNCTION
1
Clock
2
Fahrenheit and Celsius
conversion
3
Sound On/Off
4
Sound High/Low
5
End tone On/Off
6
Calibration
7
Sabbath Mode
8
Turntable On/Off
9
Language
0
Demo Mode
Clock
This is a 12-hour clock. Before setting, make sure the oven(s),
Kitchen Timer, and Timed Cooking are off.
To Set:
1.
Touch
Clock/Tools
.
2.
Touch
the
“1”
key.
3.
Touch
the
number
keys
to
set
the
time
of
day.
4.
Touch
S
tart
.
Kitchen Timer
The Kitchen Timer can be set in minutes and seconds or hours
and minutes, and counts down the set time.
NOTE:
The Kitchen Timer does not start or stop the oven.