KitchenAid KGRS206XSS Use & Care Guide - Page 6
Save these instructions for future reference., Grounding Instructions, Conversion to L.P. Gas - gas range
UPC - 883049215730
View all KitchenAid KGRS206XSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Important Safety Instructions Grounding Instructions Avoid fire hazard or electrical shock. DO NOT use an adapter plug, an extension cord, or remove grounding prong from electrical power cord. Failure to follow this warning can cause serious injury, fire or death. This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug. For personal safety, the range must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded. If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician. See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation and grounding instructions. Conversion to L.P. Gas Personal injury or death from electrical shock may occur if the range is not installed by a qualified installer or electrician. Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by a qualified technician. This appliance allows for conversion to Liquefied Petroleum (L.P.) Gas. If L.P. conversion is needed, contact your local L.P. Gas provider for assistance. The L.P. conversion kit is provided with this appliance and is located on the lower REAR (back side) panel of the range. Before installing the kit be sure to follow the L.P. Installation Instructions carefully. Grounding type wall receptacle Do not under any circumstance, cut, remove, or bypass the grounding prong. Power supply cord with 3-prong grounding plug. Save these instructions for future reference. 6