KitchenAid KGRS206XSS Use & Care Guide - Page 24
Warming Drawer
UPC - 883049215730
View all KitchenAid KGRS206XSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Warming Drawer (some models) Removing and replacing the Warming Drawer Electrical shock hazard can occur and result in serious injury or death. Disconnect appliance from electric power before cleaning and servicing the warming drawer. To remove the warming drawer: 1. Turn power OFF to the appliance before removing the warming drawer. 2. Open the warming drawer completely. 3. On left warming drawer rail, locate black release lever and press up with finger while pulling out slightly on the oven drawer handle. On right warming drawer rail, locate black release lever and press down with finger while pulling out slightly on the warming drawer handle (See Fig. 1). 4. The warming drawer should now be released from the rails. Remove warmer oven drawer (using level & square motion) completely out and away from the appliance. To replace the warming drawer: 1. Pull the bearing glides to the front of the outer compartment glide channels until they snap into place (See Fig. 3). 2. Carefully line up both sides of the warming drawer glide rails to the outer compartment glide channels located inside the empty warming drawer compartment (See Fig. 2). 3. While holding the warming drawer level and square using the warming drawer handle, push (do not force) the warming drawer all the way into the outer compartment glide channels all the way into the range. Open the warming drawer again to verify the glides have seated. 4. If you do not hear the levers click or the bearing glides do not feel seated remove the warming drawer and repeat steps 1 through 3 again. This will minimize possible damage to the bearing glides. Left-hand rail and release Warmer drawer handle Right-hand rail and release Fig. 1 Left-hand channel Right-hand channel Fig. 2 Fig. 3 24