KitchenAid KFGC558JPA Installation Instructions - Page 29

Push down on the clip on the electrode bracket

Get KitchenAid KFGC558JPA PDF manuals and user guides View all KitchenAid KFGC558JPA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

8. Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to help hold the gas orifice spud in the nut driver while changing it. Insert nut driver into the gas opening, and press down onto the gas orifice spud, then remove by turning the propane gas orifice spud counterclockwise and lifting out. Set propane gas orifice spud aside. 12. Replace oven bake burner electrode inside bracket. B A A A. Propane gas orifice spud 9. Natural gas orifice spuds are stamped with a letter and a number. Install the Number 154 oven bake burner orifice spud. 10. Place Propane gas orifice in plastic parts bag for future use, and keep with package containing literature. 11. Push down on the clip on the electrode bracket. B A A. Oven bake burner electrode B. Oven bake burner electrode bracket 13. Reinstall the oven bake burner and oven bake burner screws. See Step 5 for illustration. Replace Oven Bake Burner Cover 1. Align rear shoulder screw mounting holes (keyholes) on the oven bake burner cover with shoulder screws in the bottom of the oven. A. Oven bake burner electrode bracket B. Electrode bracket clip A B A. Shoulder screw mounting holes (keyholes) B. Shoulder screws 2. Drop cover and slide to left or right to slide shoulder screws into narrow ends of keyholes, and lock into place. A A. Bake burner cover 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
29
8.
Apply masking tape to the end of a 1/4" (6.4 mm) nut driver to
help hold the gas orifice spud in the nut driver while changing
it. Insert nut driver into the gas opening, and press down onto
the gas orifice spud, then remove by turning the propane gas
orifice spud counterclockwise and lifting out. Set propane gas
orifice spud aside.
9.
Natural gas orifice spuds are stamped with a letter and a
number. Install the Number 154 oven bake burner orifice
spud.
10.
Place Propane gas orifice in plastic parts bag for future use,
and keep with package containing literature.
11.
Push down on the clip on the electrode bracket.
12.
Replace oven bake burner electrode inside bracket.
13.
Reinstall the oven bake burner and oven bake burner screws.
See Step 5 for illustration.
Replace Oven Bake Burner Cover
1.
Align rear shoulder screw mounting holes (keyholes) on the
oven bake burner cover with shoulder screws in the bottom of
the oven.
2.
Drop cover and slide to left or right to slide shoulder screws
into narrow ends of keyholes, and lock into place.
A
A. Propane gas orifice spud
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
B
A
A. Shoulder screw mounting holes (keyholes)
B. Shoulder screws
A
A. Bake burner cover