Kenwood TM-G707A User Manual - Page 48
Program Scan
View all Kenwood TM-G707A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
PROGRAM SCAN 1 Program Scan is identical with VFO Scan except that 2 you select the frequency range of the scan. 3 4 1 s 5 6 7 8 ■ Setting Scan Limits 9 10 You can store up to 6 scan ranges in memory channels L1/U1 to L6/U6. 11 1 Select the desired band. 12 2 Select the desired frequency as the lower limit. 13 3 Press [F]. 14 4 Select a channel in the range from L1 to L6. 15 16 17 18 19 20 5 Press [MR]. 21 • The lower limit is stored in the channel. 22 6 Select the desired frequency as the upper limit. 7 Press [F]. 42 8 Select a matching channel in the range from U1 to U6. • If you have selected, for example, L3 in step 4, select U3. 9 Press [MR]. • The upper limit is stored in the channel. 10 To confirm the stored scan limits, press [MR], then select the L and U channels. Note: ◆ The lower limit must be lower in frequency than the upper limit. ◆ The lower and upper frequency steps must be equal. ◆ The lower and upper limits must be selected on the same band.