Kenwood TK-3360 User Manual 1 - Page 19

Priority Scan If a Priority channel has been programmed, the transceiver will automatically change to the Priority channel when a call is received on that channel, even if a call is being received on a normal channel. If the Priority channel has been set as Operator Selectable by your dealer, you can set a new channel as the Priority channel by selecting your desired channel and pressing the key programmed as Priority Channel Select. Temporary Channel Lockout During scan, you can temporarily remove specific channels from the scanning sequence by pressing the key programmed as Scan Temporary Delete while Scan is paused at the undesired channel. • The channel is no longer scanned. However, when scanning is ended and restarted, the channels are reset and deleted channels will again be in the scanning sequence. Scan Revert The Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following types of Scan Revert channels: • Selected: The last channel selected before scan. • Selected + Talkback: Same as "Selected", plus you can respond to calls on the channel at which scan is paused. • Priority: The Priority channel. • Priority + Talkback: Same as "Priority", plus you can respond to calls on the channel at which scan is paused. • Last Called + Selected: The last channel on which you receive a call or the last channel selected before scan, whichever operation occured latest. 12