Kenwood TH-G71A User Manual - Page 25
Recalling Memory Channels, Clearing Memory Channels
View all Kenwood TH-G71A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
RECALLING MEMORY CHANNELS 1 Press [MR] to enter Memory Recall mode. • The memory channel used last is recalled. 2 Turn the Tuning control to select the desired memory channel. • You cannot recall empty memory channels. • To restore VFO mode, press [VFO]. You may want to recall only memory channels that store frequencies of the current band. Access Menu No. 2 (MR) to select "ONE". The default is "ALL". ONE: Recalls only memory channels of the current band. ALL: Recalls all programmed memory channels. For example, allows you to recall a VHF frequency channel when operating the UHF band. Note: ◆ You can also recall memory channels by directly entering numeric keys. See "Memory Channel Number Entry" {page 40}. ◆ When you recall an odd-split memory channel, "+" and "-" appear on the display. Press [REV] to display the transmit frequency. ◆ After recalling a memory channel, you may program data such as Tone or CTCSS. These settings, however, are cleared once you select another channel or the VFO mode. To permanently store the data, overwrite the channel contents {page 18}. CLEARING MEMORY CHANNELS 1 Recall the desired memory channel. 1 2 Switch OFF the power to the transceiver. 3 Press [MR]+ POWER ON. 2 • A confirmation message appears. 3 4 2 1 5 4 Press [MR] again. 6 • The contents of the selected memory channel are erased. 7 8 9 10 11 12 13 14 15 19