Kenwood NX-300S Instruction Manual 1 - Page 9
in your area.
![]() |
View all Kenwood NX-300S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• Do not disassemble or modify the transceiver for any reason. • Do not place the transceiver on or near airbag equipment while the vehicle is running. When the airbag inflates, the transceiver may be ejected and strike the driver or passengers. • Do not transmit while touching the antenna terminal or if any metallic parts are exposed from the antenna covering. Transmitting at such a time may result in a high-frequency burn. • If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, remove the battery pack from the transceiver, and contact your KENWOOD dealer. • Use of the transceiver while you are driving may be against traffic laws. Please check and observe the vehicle regulations in your area. • Do not expose the transceiver to extremely hot or cold conditions. • Do not carry the battery pack (or battery case) with metal objects, as they may short the battery terminals. • Danger of explosion if the battery is incorrectly replaced; replace only with the same type. v
![](/manual_guide/products/kenwood-nx200-instruction-manual-f5be049/9.png)