Kenwood NX-210G Instruction Manual 1 - Page 39
VOX Gain Level, VOX Operation
![]() |
View all Kenwood NX-210G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
■ VOX Gain Level 1 Connect the headset to the transceiver. 2 Press the key programmed as VOX. • The current VOX Gain level appears on the display. 3 Press / to increase or decrease the VOX Gain level. • The VOX Gain can be adjusted from levels 1 to 10. 4 While adjusting the level, speak into the headset microphone to test the sensitivity level. (Your voice is not transmitted during this test procedure.) • When sound is recognized, the LED lights orange. 5 Press to save the setting. ■ VOX Operation 1 Connect the headset to the transceiver. 2 Press and hold the key programmed as VOX for 2 seconds. 3 To transmit, simply speak into the microphone. • The transceiver recognizes sound levels depending on the VOX Gain level. If it is too sensitive, it will transmit when there is noise in the background. If it is not sensitive enough, it will not pick up your voice when you begin speaking. 4 When you finish speaking, transmission ends. 5 To turn the VOX function OFF, press and hold the VOX key again, for 2 seconds. Note: If a speaker/ microphone is connected to the transceiver while VOX is ON, and the VOX Gain Level is set to a sensitive level, louder received signals may cause the transceiver to transmit. 25
![](/manual_guide/products/kenwood-nx210-instruction-manual-267b07e/39.png)