Kenwood NX-210G Instruction Manual 1 - Page 33
Receiving, Reviewing Messages in the Stack Memory
![]() |
View all Kenwood NX-210G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
6 Press the PTT switch or Side 2 key to initiate the call. • "" appears on the display when the status has been successfully transmitted. ■ Receiving The icon will flash and a calling ID or text message will appear when a Status call is received. Press any key to return to normal operation. ■ Reviewing Messages in the Stack Memory 1 Press the key programmed as Stack, or press and hold the key programmed as Selcall, Status, or Selcall + Status to enter Stack mode. • The last received message is displayed. 2 Press / to select the desired message. • Message types are identified as follows: I: Caller ID, S: Status Message, M: Short Message • Press and hold for 1 second to cycle the display information as follows: ID Name > Status/Short Message > CH/GID > Time Stamp 3 Press to return to normal operation. • To delete the selected message, press or #. To confirm the deletion, press or . • To delete all messages, press and hold or # for 1 second. To confirm the deletion, press or . SHORT/LONG MESSAGES Received short messages are displayed the same as Status messages and are stored in the same stack memory. To send short messages, and to send and receive long messages, you must connect the transceiver to a PC. Ask your dealer for details. 19
![](/manual_guide/products/kenwood-nx210-instruction-manual-267b07e/33.png)