Kenwood KMR-700U Instruction Manual - Page 22

Appendix Menu Glossary • AMP Selecting "OFF" turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. • ILM Dimmer Reduces the key Illumination brightness. Auto: Dims the illumination in conjunction with the Light switch of the vehicle. Manual: Dims the illumination constantly. OFF: Does not dim the illumination. • DISP Dimmer Reduces the display Illumination brightness. Auto: Dims the illumination in conjunction with the Light switch of the vehicle. Manual: Dims the illumination constantly. OFF: Does not dim the illumination. • DISP N/P Switches the panel display between positive or negative. In addition, you can reverse it in conjunction with the interior light. POSI1 : Displays the text in the positive. POSI2 : When the interior light is off, the text is displayed in the positive; when the interior light is on, the text is displayed in the negative. NEGA1 : Displays the text in the negative. NEGA2 : When the interior light is off, the text is displayed in the negative; when the interior light is on, the text is displayed in the positive. • Seek Mode Select a tuning mode of the radio. Tuning mode Auto seek Preset station seek Manual Display Operation "Auto1" Automatic search for a station. "Auto2" Search in order of the stations in the Preset memory. "Manual" Normal manual tuning control. • Supreme Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz). Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. 2CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 22 | KMR-700U