Kenwood A-K805 Operation Manual - Page 49

References Precautions on CD-R/CD-RW For CD-Rs/CD-RWs edited by the user, only finalized CDs can be played back on the System. 0 To create a CD-R/CD-RW disc, set the format to "ISO 9660 Level 1". Do not use discs that are packet-written (UDF format). 0 For CD-Rs/CD-RWs that contain MP3/WMA files, it may take a longer time to read the disc compared to normal audio discs. (The amount of reading time needed varies with the configuration of the folders and files.) Important for USB mass storage class devices 0 Playable files for USB device is MP3/WMA/AAC file. 0 Do not connect devices other than a USB flash memory device and a digital audio player that supports the USB mass storage class to the USB terminal. 0 It is recommended that you use a USB device with a capacity of 16 GB or smaller. 0 The more files there are in a USB device, the longer it takes for the System to load them. 0 Deactivate the security function of the USB device before connecting. 0 You cannot connect a computer to the USB terminal of the System. 0 Depending on the connected devices, malfunction may occur. If this happens, turn off the power of the System, and turn it back on again. 0 Do not use a USB hub. 0 When connecting with a USB cable, use a USB 2.0 cable less than 1 m in length. 0 Some USB devices may not be recognized or may not operate properly. 0 If the USB device is divided into multiple partitions, the System recognizes only the first partition. 0 It may take a longer time for the System to recognize some USB devices. 0 Some USB devices may not be recognizable by the System. 0 Playback does not start if there are no playable files in the USB device. 0 You cannot send any data from the unit to the USB device. 0 The System does not allow files and folders to be deleted. 0 Before connecting, read through the instruction manual of the USB device. 49