Jenn-Air JDRP536HM Owners Manual - Page 16

USING YOUR OVEN OVEN CONTROL KNOBS To Use: 1. Select desired function on the Mode Knob. 2. Select desired temperature on the Temperature Knob. 3. To turn off the unit, the temperature knob needs to be turned to OFF. Knob Combinations The following table shows valid and invalid knob combinations for the temperature and mode knobs. MODE KNOB Bake Convect Bake Convect Roast Steam Bread/Meats Broil/Convect Broil Self Clean Wi-Fi PROOF Valid KEEP WARM Valid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid Invalid TEMPERATURE KNOB TEMP RANGE BROIL LOW BROIL HIGH Valid 225-500oF (107-260oC) Invalid Invalid Valid 225-500oF (107-260oC) Invalid Invalid Valid 225-500oF (107-260oC) Invalid Invalid Valid 250-450oF (121-232oC) Invalid Invalid Invalid Valid Valid Invalid Invalid Invalid Invalid Invalid Invalid CLEAN Invalid Invalid Invalid Invalid Invalid Valid Invalid Wi-Fi Invalid Invalid Invalid Invalid Invalid Invalid Valid NOTE: When the unit is on, mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the Start button to confirm mode change. INDICATOR LIGHTS The indicator lights illuminate and blink to show the status of the unit. BEHAVIOR Light Pulsing/Blinking Mode and Temperature Knob Indicator - Slow Blink DESCRIPTION/EXAMPLES Light pulsing is used on the Mode Knob, Temperature Knob, and the Start button as a way to prompt for action. When an action is prompted to be completed, the associated indicator light feature will blink. Examples: Occurrence: Prompt for action, press the Start button Result: Start button indicator light quickly blinks Occurrence: 100ºF (38ºC) decrease in temperature required or oven too hot for Proof Result: Knob indicator lights will slowly blink until the oven is at the correct proof temperature The Mode and Temperature knob indicators will slowly blink to indicate that the feature is in use. EXAMPLES There are two types of pulsing: 1. Start Button Quick Blink: prompting for action. 2. Mode/Temperature Knob White slow blink: preheating Amber slow blink: unit is above target temperature. When a cycle requiring preheat starts, slow blink will begin. When preheat temperature has been reached, the blinking will stop and the mode/temp indicator lights will be solid. A slow blink indicates that a feature is being used and no further action is required i.e. unit is preheating. HOW TO START OVEN 1. Set mode and temperature knobs to desired selection. NOTE: The Start button will blink white when ready. 2. Press the Start button to begin cycle. 16