JVC GM-X50U Instruction Manual - Page 6
Rear Views 1, G, B, R, HD/Cs, VD VIDEO input terminals BNC
View all JVC GM-X50U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Rear Views 1 1 2 3 AUDIO L/MONO VIDEO R IN OUT VIDEO A AUDIO L/MONO VIDEO R IN Y/C IN VIDEO B AUDIO L/MONO VIDEO R Y/G Pb/B Pr/R HD/Cs VD COMPONENT/RGB B 1 VIDEO A terminals (page 11) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio input terminals of a VCR, etc. VIDEO IN terminal (BNC) Connect this terminal to the video output terminal of a VCR, etc. VIDEO OUT terminal (BNC) Connect this terminal to the video input terminal of another monitor, etc. Note: • Since the video output terminals on this Display are loop-through terminals, the devices connected to this video output terminal should be correctly terminated. Otherwise, pictures become abnormally bright or the Display screen gets affected abnormally. 2 VIDEO B terminals (page 11) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio output terminals of a VCR, etc. Y/C (S video) IN terminal (mini DIN 4pin) Connect this terminal to the S-video output terminal of a VCR, etc. VIDEO IN terminal (pin jack) Connect this terminal to the video output terminal of a VCR, etc. Note: • When both the video and S-video terminals are connected, the S-video terminal will have priority. 3 COMPONENT/RGB B input terminals (page 11) AUDIO (L/MONO, R) input terminals (pin jack) Connect these terminals to the audio output terminals of the other equipment. G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC) Connect these terminals to the following output terminals of a personal computer or other equipment: - Analog RGB signal output terminals - Horizontal sync (HD) signal or composite (Cs) signal output terminal - Vertical sync (VD) signal output terminal Notes: • External sync signals are automatically detected when they come in. • When both horizontal (HD)/vertical (VD) sync and composite (Cs) sync are connected, HD/VD sync signals will be used. Y, Pb, Pr (VIDEO) input terminals (BNC) Connect these terminals to the component signal output terminals of NTSC or high-vision equipment. Note: • When these terminals are used as the component terminals (Y, Pb, Pr)-see "Setting the COMPONENT/ RGB B Input" on page 20, external sync signals (HD/Cs, VD) cannot be used. 5