JVC DLA-RS4800U Command Communication Specification for D-ILA Projectors (v1.7 - Page 7

Outline, Interface - dla rs4800

Get JVC DLA-RS4800U PDF manuals and user guides View all JVC DLA-RS4800U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

1 Outline 1 Outline This specification describes how to control the D-ILA projector * by using an external controller through the RS-232C interface. * DLA-X30/X388/RS45, DLA-RS4800, DLA-X70/X788/RS55, and DLA-X90/XC988/RS65 2 Interface 2.1 Terminal D-SUB 9pin Male terminal Pin No. Name Pin No. 1 NC 6 2 RXD 7 3 TXD 8 4 NC 9 5 GND Name NC NC NC NC 2.2 External Controller Connector Serial port connector (RS-232C) For type of the connector and pin layout, please refer to each controller's specifications. 2.3 Communication Line This control system uses RXD (receive data), TXD(transmit data) and GND line. Use an RS-232C crossover cable to connect the projector to the external controller like as PC. 7 / 80 PJ03220107B

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
1 Outline
7 / 80
PJ03220107B
1
Outline
This specification describes how to control the D-ILA projector * by using an external controller through the RS-232C interface.
* DLA-X30/X388/RS45, DLA-RS4800, DLA-X70/X788/RS55, and DLA-X90/XC988/RS65
2
Interface
2.1
Terminal
D-SUB 9pin Male terminal
Pin No.
Name
Pin No.
Name
1
NC
6
NC
2
RXD
7
NC
3
TXD
8
NC
4
NC
9
NC
5
GND
2.2
External Controller Connector
Serial port connector (RS-232C)
For type of the connector and pin layout, please refer to each controller’s specifications.
2.3
Communication Line
This control system uses RXD (receive data), TXD(transmit data) and GND line. Use an RS-232C crossover cable to connect the
projector to the external controller like as PC.