Invacare SOLARA3GLS4 Owners Manual - Page 97
Installing/Adjusting Anti-Tippers, Installing the Anti-Tippers, Adjusting the Anti-Tippers
View all Invacare SOLARA3GLS4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
13 WHEEL LOCKS/ANTI-TIPPERS 13.4 Installing/Adjusting Anti-Tippers A 1 1/2 to 2 1/4 inch clearance between the bottom of the anti-tipper wheels and the floor MUST be maintained at all times. Installing the Anti-Tippers 1. Remove the anti-tippers from the accessory carton. ƽ WARNING Anti-tippers MUST be fully engaged and spring buttons fully protruding out of adjustment holes 2. Press the release buttons in and install the anti-tippers with the wheels facing down until the locking buttons lock in place (FIGURE 8). 3. Adjust the anti-tippers. Refer to Adjusting the Anti-Tippers on page 97. Adjusting the Anti-Tippers 1. Depress the release button on the wheeled portion of the antitipper and slide it up/down to achieve 1 1/2 to 2 1/4 inch clearance. ƽ WARNING Anti-tippers MUST be fully engaged and release buttons fully protruding out of same respective adjustment holes BEFORE use. This will avoid a 3Wheeling situation.. Release Button Anti-tipper 2. Ensure that the release buttons are fully engaged in the adjustment holes and 1 1/2 to 2 1/4 inch clearance is maintained. 3. If a 1 1/2 to 2 1/4 inch clearance cannot be obtained, contact a qualified technician. 4. Repeat STEPS 1-3 for opposite side. Release Button Anti-tipper (Wheeled Portion) FIGURE 8 Locking Button Wheelchair Frame Installing/Adjusting Anti-Tippers Part No 1154295 97 Invacare® Solara®3G/Spree 3G Wheelchair