Invacare RPL450-1 Owners Manual - Page 17
Caution
View all Invacare RPL450-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Assembling the Manual/Hydraulic Pump to the Boom ƽ CAUTION DO NOT overtighten the nut and bolt. This damages the mounting bracket. 1. Remove the shoulder bolt, washer and nut from the mounting bracket on the boom assembly. 2. Unpack the pinch guard from the patient lift carton. 5 ASSEMBLY Mounting Bracket The bottom of the hydraulic pump assembly will already be assembled to the mast mounting bracket. 3. Cut the plastic-wrap that secures the boom and mast together. 4. Lift-up on the boom and place it on your left shoulder. 5. Let the hydraulic pump rest on the right-side of your chest and rotate the shaft extension of the hydraulic pump assembly until it lines-up with the mounting bracket holes in the boom assembly. 6. Turn the pinch guard 90° and place over the shaft extension of the hydraulic pump. 7. Align the holes of the boom assembly mounting bracket with those of the hydraulic pump and insert the bolt. Secure with washer and nut. Pinch Guard Turn 90° Be sure that the bolt is completely through the holes of the boom assembly mounting bracket and the manual/hydraulic pump assembly. The boom assembly will pivot easily if the mounting hardware is aligned properly when the boom assembly is secured to the mast. Part No. 1078987 17 Manual/Electric Portable Patient Lift