Invacare IOH200 Owners Manual - Page 19
Disconnecting the Cylinder from the, Compressor
View all Invacare IOH200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
4.4 Disconnecting the Cylinder from the Compressor Usage 3. With the other hand, grasp the outer ring (sleeve) of the connector fillport E and push DOWN F. 4. Lift up on the cylinder to remove from the connector fillport. 5. When the cylinder fillport is disconnected from the connector fillport, release the outer ring (sleeve) of the connector fillport and use two hands to remove the cylinder from the compressor cradle. WARNING! - NEVER use tools of any kind to connect/disconnect the cylinder and the compressor. Otherwise, severe injury and/or damage may occur. 1. Press the compressor power switch A to the Off (O) position. 2. Grasp the cylinder B in the area behind the cylinder fillport C. 1100873-N WARNING! - The fillport cover on the connector fillport and the cylinder fillport MUST be replaced after filling and whenever not in use. If either of the fillport covers are missing contact your healthcare provider before using. 19