Invacare IFX-20C Owners Manual 1 - Page 114
Troubleshooting
View all Invacare IFX-20C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
LiNX® Control System 8 Troubleshooting 8.1 Fault diagnosis If the electronic system shows a fault, use the following fault-finding guide to locate the fault. Ensure that the drive electronics system is powered up before starting any diagnosis. If the status display is OFF: • Check whether the drive electronics system is powered up. • Check whether all cables are correctly connected. • Ensure that the batteries are not discharged. If a fault number is displayed in the status display: • Proceed to the next section. 8.1.1 Fault codes and diagnosis codes If there is a fault with the system when it is powered up, a fault icon A is displayed in the status bar. The number inside the triangle indicates the type of fault. Corresponding to that, the status LED inside the ON/OFF button flashes red. The number of flashes is identical to the one in the status bar. 114 The table below describes the fault indication and a few possible actions that can be taken to rectify the problem. The actions listed are not in any particular order and are suggestions only. The intention is that one of the suggestions may help you clear the problem. If in doubt, contact your provider. Fault icon Fault Possible action description Remote fault • Check cables and connectors. • Contact your provider. Network or configuration fault • Check cables and connectors. • Recharge the batteries. • Check charger. • Contact your provider. Motor 11 fault • Check cables and connectors. • Contact your provider. Motor 21 fault • Check cables and connectors. • Contact your provider. Left magnetic brake fault • Check cables and connectors. • Check left motor (or motor lock lever) is engaged. • Refer to the chapter "Pushing the mobility device in freewheel mode" in the user manual of your wheelchair. • Contact your provider. 60126082-A