Invacare CRFAT Owners Manual - Page 29
Adjusting Swingaway Padded Armrest Height, Repeat STEPS 1
View all Invacare CRFAT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Arms Adjusting Swingaway Padded Armrest Height NOTE: For this procedure, refer to FIGURE 2. 1. Remove the half arm from the arm socket. 2. Remove the mounting bolt, two washers and locknut mounted in the arm socket that determine the swingaway padded armrest height. 3. Reposition mounting bolt and one washer to one of three positions in the arm socket depending on the desired height. 4. Retighten the mounting bolt and washer to the arm socket with the remaining washer and locknut. 5. Reinstall the half arm into the arm socket. 6. Repeat STEPS 1‐5 for the opposite side, if necessary. Swingaway Padded Armrest Arm Socket Washer Locknut Three Mounting Positions Washer Mounting Bolt FIGURE 2 Adjusting Swingaway Padded Armrest Height Part No 1134872 29 Crossfire™Series Wheelchairs